JM010502NPW22, WEG, REPLACE Maxmotion JMP-31, JMPP-31
Frame |
213/5JM |
Output |
10 HP (7.5 kW) |
Number of Poles |
2 |
Frequency |
60 Hz |
Rated speed |
3515 rpm |
Slip |
2.36 % |
Rated voltage |
575 V |
Rated current |
9.36 A |
L. R. Amperes |
66.5 A |
LRC |
7.1x(Code H) |
No load current |
2.72 A |
Rated torque |
14.7 ft.lb |
Locked rotor torque |
210 % |
Breakdown torque |
290 % |
Locked rotor time |
34s (cold) 19s (hot) |
Moment of inertia (J) |
0.4680 sq.ft.lb |
Design |
B |
Insulation Class |
F |
Service factor |
1.25 |
Temperature rise |
80 K |
Duty Cycle |
Cont.(S1) |
Starting Method |
Direct On Line |
Ambient temperature |
-20°C to +40°C |
Altitude |
1000 m.a.s.l. |
Degree of Protection |
IP55 |
Enclosure |
IC411 - TEFC |
Mounting |
F-1 |
Rotation¹ |
Both (CW and CCW) |
Noise level² |
72.0 dB(A) |
Approx. weight³ |
169 lb |
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.
Efficiency
50% |
75% |
100% |
88.5 |
89.5 |
89.5 |
Power factor
50% |
75% |
100% |
0.79 |
0.87 |
0.90 |
Features
Frame Material |
Cast Iron |
Impregnation Method |
Dip and Bake Polyester |
Main terminal box hole |
NPT 1" |
Terminal Block |
Without |
Drain |
Rubber, automatic |
Shaft Material |
SAE 1040/45 Carbon Steel |
Painting |
RAL 5009 207A (ISO 12944 - C2) |
Grounding Lugs |
Single |
Fan Cover material |
Rolled Steel |
Tropicalized Painting |
Without |
Fan material |
Plastic |
Bearing cap |
Yes- Bearing Cap |
Balancing Method |
1/2 Key |
Drip Cover |
Without |
Pump Seal |
Mechanical Seal |