MD10P, MICRO DRIVE Drive, DC, 5A, 1/8 DIN, 120/240VAC Input, Programmable, Scaleable

E-Motor Nations

$1,510.87

MD10P, MICRO DRIVE Drive, DC, 5A, 1/8 DIN, 120/240VAC Input, Programmable, Scaleable

Property	Specification
Part Number	MD10P
Product Type	DC Motor Speed Controller (SCR-based)
Series	MD Series
Enclosure Type	1/8 DIN Panel Mount
Input Voltage	120/240 VAC ±10%
Output Voltage	0–90 VDC (120 VAC input) / 0–180 VDC (240 VAC input)
Output Current	Up to 5 Amps DC
Horsepower Range	1/50 – 1/2 HP @ 90 VDC / 1/8 – 1 HP @ 180 VDC
Speed Regulation	±0.1% of base speed
Speed Range	100:1
Acceleration/Deceleration	Adjustable (2 – 4 seconds)
IR Compensation	Adjustable
Current Limit	Adjustable
Operator Controls	Front-panel pushbuttons with LED display
Display	0.5" LED display showing speed setting
Programmability	Programmable parameters including max/min speed, decimal points, operating mode
Modes of Operation	Master (Rate/Time), Follower
Certifications	cULus Listed, RoHS Compliant
Dimensions (W×H×D)	3.62" × 1.66" × 4.63" (91.9 mm × 42.2 mm × 117.6 mm)
Weight	Approximately 1.32 lbs (0.60 kg)
Manufacturer	Dart Controls, Inc.

The MD Series is a compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes Dart’s Micro-Drive the ultimate value in accuracy and control.

Friendly front-panel f ield programming permits customizing the MD for specific applications. The MD can be set to display the target speed directly in RPM, FPM, GPM,
process time, or any other engineering unit. Programmable parameters include maximum and minimum set speed, decimal points, and operating mode (master or follower).

The Micro-Drive is simple to operate: set the desired RPM, rate, or time in the large 1/2” LED display by depressing the “Up” and “Down” pushbuttons on the front panel. Settings can be one digit at a time or fast sweep. The Micro-Drive settings are exact and repeatable. It will precisely control speed to ±1/2 RPM of set speed, long term. No calibrations of the control are necessary.

The MD10P and MD3P have 1/8 DIN and 1/4 DIN industry
standard cutout dimensions respectively, providing easy
panel installations.