JM010502NPW22, Weg, 10 Hp, 3600 Rpm, 600V, 213/5JM, Pump, W22, JMPP-31

$1,760.85

JM010502NPW22, WEG, REPLACE Maxmotion JMP-31, JMPP-31

Frame	213/5JM
Output	10 HP (7.5 kW)
Number of Poles	2
Frequency	60 Hz
Rated speed	3515 rpm
Slip	2.36 %
Rated voltage	575 V
Rated current	9.36 A
L. R. Amperes	66.5 A
LRC	7.1x(Code H)
No load current	2.72 A
Rated torque	14.7 ft.lb
Locked rotor torque	210 %
Breakdown torque	290 %
Locked rotor time	34s (cold) 19s (hot)

Moment of inertia (J)	0.4680 sq.ft.lb
Design	B
Insulation Class	F
Service factor	1.25
Temperature rise	80 K
Duty Cycle	Cont.(S1)
Starting Method	Direct On Line
Ambient temperature	-20°C to +40°C
Altitude	1000 m.a.s.l.
Degree of Protection	IP55
Enclosure	IC411 - TEFC
Mounting	F-1
Rotation¹	Both (CW and CCW)
Noise level²	72.0 dB(A)
Approx. weight³	169 lb

(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50%	75%	100%
88.5	89.5	89.5

Power factor

50%	75%	100%
0.79	0.87	0.90

Features

Frame Material	Cast Iron
Impregnation Method	Dip and Bake Polyester
Main terminal box hole	NPT 1"
Terminal Block	Without
Drain	Rubber, automatic
Shaft Material	SAE 1040/45 Carbon Steel
Painting	RAL 5009 207A (ISO 12944 - C2)
Grounding Lugs	Single
Fan Cover material	Rolled Steel
Tropicalized Painting	Without
Fan material	Plastic
Bearing cap	Yes- Bearing Cap
Balancing Method	1/2 Key
Drip Cover	Without
Pump Seal	Mechanical Seal

We Also Recommend

PESWS-25V24AX-RM33, Weg, 5HP, 1PH, 25 Amps, 230V, Nema 4X, MotorStarter

PESW-9V56AXR27, Weg, 5 HP, 3PH, 6.5A, 575V, Nema 4X, MotorStarter

FD003104WC,Weg,3 Hp,1800 Rpm,115/230V,Fr:182/4TC,Tefc, Farm Duty,

FD003104WC,Weg,3 Hp,1800 Rpm,208-230V,Fr:182/4TC,Tefc, Farm Duty,

PESWS-9V18AX-RM27, Weg, 1/4 HP, 120V, Nema4X, 4-6.3 A, Enclosed Starter

PESWS-50V24AX-RM38, Weg, 7.5 HP, 240V, 1PH, Nema4X, 25-40A, Motors Starter