CT010504NPW01, Weg, 10 Hp, 1800 Rpm, 575 Volts, Frame: 213/5TC, Tefc,
CT010504NPW01, Weg
Specification | Details |
---|---|
Frame | 213/5TC |
Voltage | 575 V |
Number of Poles | 4 |
Altitude | 1000 m.a.s.l. |
Starting Method | Direct On Line |
Temperature Rise | 80 K |
Insulation Class | F |
Moment of Inertia (J) | 1.07 sq.ft.lb |
Breakdown Torque | 300 % |
No Load Current | 4.43 A |
L. R. Amperes | 68.3 A |
Slip | 2.22 % |
Mounting | F-1 |
Frequency | 60 Hz |
Frame Material | Rolled Steel |
Main Terminal Box Hole | 1.377" |
Drain | Rubber, automatic |
Painting | Munsell N 1 - Matte 207N (ISO 12944 - C2) |
Fan Cover Material | Steel |
Fan Material | Plastic |
Balancing Method | 1/2 Key |
Overload Protector | Without overload protector |
Grease Type | Mobil Polyrex EM |
Rotation | Both (CW and CCW) |
Bearing Type | 6208 ZZ |
NDE Bearing Seal | Without Bearing Seal |
Flange | C |
Output | 10 HP (7.5 kW) |
Terminal Box | Left position |
Ambient Temperature | -20°C to +40°C |
Duty Cycle | Continuous (S1) |
Service Factor | 1.15 |
Design | B |
Locked Rotor Time | 27s (cold), 15s (hot) |
Rated Torque | 29.8 ft.lb |
LRC (Locked Rotor Current) | 7.0x (Code H) |
Rated Current | 9.76 A |
Rated Speed | 1760 rpm |
Degree of Protection | IP55 |
Standard | NEMA MG-1 |
Impregnation Method | Dip and Bake Polyester |
Terminal Block | Without |
Shaft Material | SAE 1040/45 Carbon Steel |
Grounding Lugs | Single |
Tropicalized Painting | Without |
Bearing Cap | Yes - Bearing Cap |
Drip Cover | Without |
NDE Bearing | 6206 ZZ |
Locked Rotor Torque | 250 % |
Noise Level | 60.0 dB(A) |
Sealing | V'Ring |