CT001404NPW01,WEG,1.5Hp,1750 Rpm,230-460 Volts,Fr:143/5TC,TEFC,W01,
CT001404NPW01, WEG, W01 Series,
Specification | Details |
---|
Frame | 143/5TC |
Voltage | 230/460 V |
Number of Poles | 4 |
Class | MOTOR ROLLED STEEL |
Detail | NEMA PREMIUM EFFICIENCY |
Polarity | 04 |
Ambient Temperature | -20°C to +40°C |
Duty Cycle | Continuous (S1) |
Service Factor | 1.15 (1.00 @ 208V) |
Design | B |
Locked Rotor Time | 37s (cold), 21s (hot) |
Rated Torque | 4.50 ft.lb |
Locked Rotor Current (LRC) | 8.2x (Code K) |
Rated Current | 4.04/2.02 A |
Rated Speed | 1750 rpm |
Degree of Protection | IP55 |
Standard | NEMA MG-1 |
Impregnation Method | Dip and Bake Polyester |
Terminal Block | Without |
Shaft Material | SAE 1040/45 Carbon Steel |
Grounding Lugs | Single |
Tropicalized Painting | Without |
Bearing Cap | Yes, with Bearing Cap |
Drip Cover | Without |
Non-Drive End (NDE) Bearing | 6203 ZZ |
Locked Rotor Torque | 270% |
Noise Level | 52.0 dB(A) |
Sealing | V'Ring |
Flange | C |
Output | 1.5 HP (1.1 kW) |
Terminal Box Position | Left |
Application | Rolled Steel |
Power | 1.5 HP |
Altitude | 1000 m.a.s.l. |
Starting Method | Direct On Line |
Temperature Rise | 80 K |
Insulation Class | F |
Moment of Inertia (J) | 0.1101 sq.ft.lb |
Breakdown Torque | 300% |
No Load Current | 2.17/1.08 A |
Locked Rotor Amperes | 33.1/16.6 A |
Slip | 2.78% |
Mounting | F-1/B34R(D) |
Frequency | 60 Hz |
Frame Material | Rolled Steel |
Main Terminal Box Hole | 1.118" |
Drain | Rubber, automatic |
Painting | Munsell N 1 - Matte 207N (ISO 12944 - C2) |
Fan Cover Material | Industrial polymer |
Fan Material | Plastic |
Balancing Method | 1/2 Key |
Overload Protector (Phenolic) | Without overload protector |
Grease Type | Mobil Polyrex EM |
Rotation | Both (CW and CCW) |
Bearing Type | 6205 ZZ |
NDE Bearing Seal | Without Bearing Seal |