Catalog Number |
RL1203A |
Enclosure |
OPEN |
Frame |
48 |
Frame Material |
Steel |
Frequency |
60.00 Hz |
Motor Letter Type |
Cap Start, Induction Run |
Output @ Frequency |
.250 HP @ 60 HZ |
Phase |
1 |
Synchronous Speed @ Frequency |
1800 RPM @ 60 HZ |
Voltage @ Frequency |
115.0 V @ 60 HZ, 230.0 V @ 60 HZ |
Haz Area Class and Group |
None |
Haz Area Division |
Not Applicable |
Agency Approvals |
UR, CSA |
Ambient Temperature |
40 °C |
Auxillary Box |
No Auxillary Box |
Auxillary Box Lead Termination |
None |
Base Indicator |
Resilient |
Bearing Grease Type |
Polyrex EM (-20F +300F) |
Blower |
None |
Current @ Voltage |
2.500 A @ 230.0 V, 3.000 A @ 208.0 V, 5.000 A @ 115.0 V |
Design Code |
N |
Drip Cover |
No Drip Cover |
Duty Rating |
CONT |
Efficiency @ 100% Load |
55.0 % |
Electrically Isolated Bearing |
Not Electrically Isolated |
Feedback Device |
NO FEEDBACK |
High Voltage Full Load Amps |
2.5 A |
Front Face Code |
Resilient Mount |
Front Shaft Indicator |
None |
Heater Indicator |
No Heater |
Insulation Class |
B |
Inverter Code |
Not Inverter |
KVA Code |
L |
Lifting Lugs |
No Lifting Lugs |
Locked Bearing Indicator |
No Locked Bearing |
Motor Lead Exit |
Terminal Panel Or Lead Hole |
Motor Lead Termination |
None |
Motor Lead Quantity/Wire Size |
7 @ 18 AWG |
Motor Type |
3411L |
Mounting Arrangement |
F1 |
Number of Poles |
4 |
Overall Length |
10.34 IN |
Power Factor |
57 |
Product Family |
General Purpose |
Pulley End Bearing Type |
Ball |
Pulley Face Code |
Resilient Mount |
Pulley Shaft Indicator |
Standard |
Rodent Screen |
None |
RoHS Status |
ROHS COMPLIANT |
Service Factor |
1.25 |
Shaft Diameter |
0.500 IN |
Shaft Extension Location |
Pulley End |
Shaft Ground Indicator |
No Shaft Grounding |
Shaft Rotation |
Reversible: Connected Standard |
Shaft Slinger Indicator |
No Slinger |
Speed |
1725 rpm |
Speed Code |
Single Speed |
Motor Standards |
NEMA |
Starting Method |
Direct on line |
Thermal Device - Bearing |
None |
Thermal Device - Winding |
None |
Vibration Sensor Indicator |
No Vibration Sensor |
Winding Thermal 1 |
Automatic Thermal Overload |
Winding Thermal 1 Location |
SB |
Winding Thermal 2 |
None |